Foto_LATO-TD_Nahaufnahme_NOVEXX_SolutionsMIC_2923MIC_2945MIC_2946MIC_2970MIC_2976MIC_2995MIC_3010print-apply-stick-evo-4-etipack-931x1024-1
Foto_LATO-TD_Nahaufnahme_NOVEXX_SolutionsMIC_2923MIC_2945MIC_2946MIC_2970MIC_2976MIC_2995MIC_3010print-apply-stick-evo-4-etipack-931x1024-1

Videos

Label Applicator: Touch-On (LA-TO)

Applies labels to moving or stationary products. Labels are dispensed onto the vacuum pad which then extends to apply the label.

The Touch-On applicator module (also known as a “tamp” applicator) can reliably and accurately apply labels to moving or stationary products, whilst being a low maintenance device.

Labels are dispensed onto the vacuum pad and after a product signal is activated, the pad extends to apply the label to the surface of the product

Variants:

LA-TO-BO  |   Applicator with stroke & blow-on function

  • Suitable for labelling sensitive items with uneven surfaces and/or variable heights
  • Contactless application: Applicator moves to the product after which the label is blown to the product in the final step
  • Easy change of label pads to apply different label sizes
  • Stroke length up to 380 mm

LA-TO-TD  |  Applicator with pressure sensor for variable heights

  • Ideal for products with variable heights
  • Applicator returns as soon as the applicator pad encounters resistance
  • Easy change of label pads to apply different label sizes
  • Stroke length up to 380mm

  • Plug and play integration with:

  • High Output for top, side or bottom apply

  • Easy change of label pads for different label sizes

  • Industrial design for reliable operation

  • Applies label to moving and stationary products

  • Low maintenance, less wear parts

Material Specifications

  • Label Material: Self-adhesive material (paper, film*)

  • Material width: 30 - 125 mm

  • Material length: 30 - 125 mm

  • Label pads: 80 x 80 mm, 125 x 125 mm

Labelling Specifications

  • Stroke length: 180 mm (nett) with end and home switch

  • Apply tolerance: +/- 1 mm

  • Apply angle: 90°

  • Product speed at apply: Up to 15 m/min

  • Apply position: Top, side or bottom of product

  • Air stream: Vacuum injector

Supplied, installed and supported in the UK by Advanced Labelling Systems, the official UK partner of Novexx Solutions — with full training and ongoing service, backed by the Possehl Group.

Not sure if this is right for your labelling requirements?  Then talk to us.

Get Some Technical Advice

Product Downloads