Technical Support for Customers of William Sessions Ltd Trading As Sessions of York now in administration from 21-04-10
For continuity of service and supply of original Avery Dennison spare parts for your Sessions of York label applicators, labelling machinery and thermal transfer printers, then Advanced Labelling Systems Ltd (ALS) can help you.
We can supply many spare parts for Sessions of York machines, including PCBs, motors, belts, print heads, ribbons and other items including those used in the Novexx and Avery Dennison range. We hold 1,000’s of parts in stock at ALS and also with our regional service engineers, based across the UK.
For spares & service call Jane on 01844 264822
Just some of the labelling machines sold by Sessions of York over the years that ALS can help with:
Label Applicators: ALS 104, ALS 204, ALS 206, ALS 256, ALS 220, ALS 221, ALS 230, ALS 306, ALS 309, ALS 320, ALS 321, ALS 330, ALS 341, ALS 350, ALS 380
Print and Apply: ALX 710, ALX 720, ALX 910, ALX 920, ALX 924, ALX 925, ALX 926, Novexx Swing, Novexx Samba
Printers: Puma, Lion, Tiger, Ocelot, Cobra, Chess range, Xxtreme, TDI, AP 5.4, TTX range, DPM print engines, Zebra desktops and PAX print engines.
Spare Parts: Unfortunately nothing lasts for ever and some components will be wear-parts such as thermal print heads, drive belts and rollers. It is often recommended to stock some of these parts yourself, however an extensive stock holding of spare parts is held in our UK warehouse and orders received before 4pm are despatched the same day.
Field Service Engineers: There are times when you need the assistance of an engineer on-site. Our engineers are based up and down the country (UK & Ireland), carrying extensive stocks of most parts, to enable a first-time fix, machine service or additional training. All our engineers are Avery Dennison trained and are approved to carry out all work using genuine spare parts.
Training: We can’t place enough emphasis on training. Usually performed at your site, on your machine, we tailor our training sessions to suit the people, such as; Operators, Supervisors and Technicians, to give the relevant users the right degree of product knowledge, allowing them to get the best out of the equipment. Training documentation and certificates are issued to those attaining the correct level of ability.
We supply thermal transfer ribbons for all near-edge and flat head printers and manufacture our own labels to your specification.
From sales and service, to spares and consumables ordering, dedicated specialists provide friendly help and advice.
Call us on 01844 213177 or email [email protected]